INSTALLATION
PROCEDURE
1. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY (FUEL PRESSURE SENSOR)
HINT:
Perform "Inspection After Repair" after replacing the fuel delivery pipe sub-assembly (fuel pressure sensor).
Click here
Click here
NOTICE:
2. PERFORM INITIALIZATION
(a) Perform "Inspection After Repair" after replacing the fuel delivery pipe sub-assembly (fuel pressure sensor).
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Fuel Lid Opener Unit: Removal
REMOVAL PROCEDURE 1. PRECAUTION Click here 2. REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY Click here 3. REMOVE REAR WHEEL LH Click here 4. REMOVE REAR WHEEL HOUSE LINER LH (a) Remove the screw. (b) Remove the 2 screws. (c) Remove the 2 grommets. HINT: The grom ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Brake Hold Standby Indicator Light Circuit
DESCRIPTION The brake hold standby indicator light turns on if brake hold control is possible when the following conditions required for operation standby are met and the brake hold switch (electric parking brake switch assembly) is pressed while the engine switch is on (IG).
Conditions required ...