DESCRIPTION
If the forward recognition camera receives a steering vibration ECU malfunction signal, DTC C1A7496 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A7496 | Steering Vibrator Component Internal Failure | While the lane control system is on, a malfunction signal from the steering vibration ECU is detected by the forward recognition camera for 5 seconds or more. | Steering vibration ECU |
CAUTION / NOTICE / HINT
NOTICE:
The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.
Click here
PROCEDURE
| 1. | REPLACE STEERING VIBRATION ECU |
(a) Replace the steering vibration ECU.
Click here
| NEXT | | END |
Vehicle Control History
Lost Communication with ECM/PCM "A" Missing Message (U010087,U012587,U012687,U012987,U013187,U015587)Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Charging System: Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Engine / Trouble Codes. (e) Check for DTCs, and then write them down. (f) Check the details of the DTCs. Click here Power ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Blind Spot Monitor System: Lost Communication with ECM / PCM "A" (U0100,U0125,U0126,U0129,U0142)
DESCRIPTION These DTCs are stored if there is a malfunction in the CAN communication system connected to the blind spot monitor sensor. HINT: If CAN communication system DTCs are stored, they may also be stored for other systems. DTC No. Detection Item DTC Detection Condition Trouble Area ...