Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Lost Communication with Power Source Control (B278C)

NOTICE:

• If the certification ECU (smart key ECU assembly) is replaced, refer to Registration.

  Click here

• When using the Techstream with the engine switch off, connect the Techstream to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and the vehicle begins. Then select Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Smart Access(CAN). While using the Techstream, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the Techstream and the vehicle.

No Response from ID BOX (B2789)

DESCRIPTION This DTC is stored when LIN communication between the certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU) stops for 10 seconds or more. DTC No. Detection ...

Network Gateway Ecu

...

Other materials:

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Door Belt Moulding: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY Install in this Direction (a) Engage the 8 claws as shown in the illustration to install ...

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic Transaxle System: Brake Switch "B" Circuit Short to Battery (P070312)
DESCRIPTION The purpose of the stop light switch signal circuit is to prevent the engine from stalling when the brakes are suddenly applied while driving in the lock-up condition. When the brake pedal is depressed, the stop light switch assembly sends a signal to the ECM. The ECM then cancels the op ...