Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Fail-safe Chart

HINT:

• If the power steering assist stops, the EPS warning light comes on (red).
• If the amount of power assist is reduced, the EPS warning light comes on (yellow) and a vibration or sound may occur.
• The amount of power assist may be decreased to prevent the motor and ECUs from overheating if the steering wheel is continuously turned when the vehicle is either stopped or being driven at a low speed, or if the steering wheel is kept at either full lock position for a long time. In such cases, the amount of power assist returns to normal when the steering wheel is not turned for approximately 10 minutes with the engine idling.
• If the battery is not sufficiently charged or the voltage decreases temporarily, the amount of power assist will be reduced and the EPS warning light will come on. In such cases, the amount of power assist returns to normal when the battery voltage recovers.

EPS Warning Light Circuit

DESCRIPTION If the power steering ECU assembly detects a malfunction, the power steering ECU assembly stores a DTC and illuminates the EPS warning light. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTIC ...

Freeze Frame Data

FREEZE FRAME DATA FREEZE FRAME DATA NOTICE: It is difficult to show the specified values (judgment values) clearly because freeze frame data values change significantly due to differences in measur ...

Other materials:

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Wireless Charger Assembly: Installation
INSTALLATION PROCEDURE 1. INSTALL MOBILE WIRELESS CHARGER CRADLE ASSEMBLY 2. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY Click here 3. INSTALL NO. 2 USB CHARGER SOCKET Click here 4. INSTALL POWER OUTLET SOCKET LENS Click here 5. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY Click here 6. ...

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Audio And Visual System (for 12.3 Inch Display): Visual Mute Signal Circuit between Radio Receiver and Multi-display
DESCRIPTION The radio receiver assembly sends a visual mute signal to the multi-display assembly. As a result, a black screen is displayed when the screen changes so that noise and distorted images are not displayed. When an open exists in the circuit, noise and distorted images will be displayed in ...