INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
(a) Align the alignment mark on the rear door opening trim weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip.
Alignment Mark:
| Location | Color |
|---|---|
| for TMC Made without Rear No. 2 Seat for LH Side | Red or Yellowish Green |
| for TMC Made without Rear No. 2 Seat for RH Side | Green or Yellow |
| for TMC Made with Rear No. 2 Seat for LH Side | Light Blue |
| for TMC Made with Rear No. 2 Seat for RH Side | Yellowish Green or Red |
| for TMMC Made LH Side | Pink |
| for TMMC Made RH Side | Yellow |
| *a | Alignment Mark |
| Flange Position |
NOTICE:
After installation, check that the corners fit correctly.
2. INSTALL ROOF HEADLINING ASSEMBLY
w/o Rear No. 2 Seat:
Click here
w/ Rear No. 2 Seat:
Click here
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: ABS Solenoid Control Module Actuator Stuck On (C143A7E,C143A7F)
DESCRIPTION The ABS solenoid relay is built into the skid control ECU in the brake actuator assembly. The ABS solenoid relay supplies power to the holding solenoid and reduction solenoid. The solenoid relay is turned on 1.5 seconds after the engine switch is turned on (IG), and is turned off if an o ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Seat Inner Belt Assembly(for Rh Side): Inspection
INSPECTION PROCEDURE 1. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 Rear seat belt RH unfastened Below 1 Ω Rear seat belt RH ...