Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE PANORAMIC MOON ROOF SYSTEM
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make notes of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Power Window.
(5) Select the setting by referring to the table below.
Power Window| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Door Key P/W Up | Function to close the power windows and sliding roof using the mechanical key | OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Door Key P/W Down | Function to open the power windows and sliding roof using the mechanical key | OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| P/W Down W/ Transmit | Function to open the power windows and sliding roof using the electrical key transmitter sub-assembly | OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
(6) Enter the following menus: Customize Setting / Slide Roof.
(7) Select the setting by referring to the table below.
Slide Roof| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Front SW Auto Operation | This function is used to enable or disable auto operation function. | ON | 0:OFF,1:ON | Sliding roof ECU (Sliding roof drive gear assembly) |
(8) Enter the following menus: Customize Setting / Security.
(9) Select the setting by referring to the table below.
Security| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Slide Roof Open Warning | This function is used to enable or disable the sliding roof open warning. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
Operation Check
OPERATION CHECK CHECK AUTO OPERATION FUNCTION (FOR SLIDING ROOF) NOTICE:
Make sure that initialization has been completed before performing this inspection.
Click here
The sliding roof auto ope ...
Initialization
INITIALIZATION INITIALIZE PANORAMIC MOON ROOF SYSTEM (FOR SLIDING ROOF) NOTICE:
When the sliding roof glass sub-assembly, sliding roof housing panel or slide roof rail sub-assembly is adjusted or r ...
Other materials:
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Parking Assist Monitor System: Steering Angle Sensor Failure (C1626)
DESCRIPTION This DTC is stored if the rear television camera assembly receives a signal via CAN communication from the steering sensor that indicates an internal malfunction. DTC No. Detection Item DTC Detection Condition Trouble Area C1626 Steering Angle Sensor Failure A fail flag ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Window Control System: Terminals Of Ecu
TERMINALS OF ECU CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (a) Disconnect the N7 multiplex network master switch assembly connector. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconn ...
Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual
- For your information
- Pictorial index
- For safety and security
- Instrument cluster
- Operation of each component
- Driving
- Lexus Display Audio system
- Interior features
- Maintenance and care
- When trouble arises
- Vehicle specifications
- For owners
Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual
0.0095