DESCRIPTION
CAUTION / NOTICE / HINT
NOTICE:
Click here
Click here
PROCEDURE
1. | CHECK BASIC FUNCTION (WIRELESS AND POWER DOOR LOCK CONTROL SYSTEM) |
(a) Check that the wireless door lock/unlock function operates normally.
Click here
(b) Check that the key-linked lock/unlock function operates normally.
Click here
Result | Proceed to |
---|---|
Wireless door lock/unlock function and key-linked lock/unlock function operate normally | A |
Wireless door lock/unlock function does not operate normally | B |
Key-linked lock/unlock function does not operate normally | C |
B | GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table) |
C | GO TO POWER DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table) |
|
2. | CHECK MANUAL UP / DOWN FUNCTION |
(a) Check that the manual up and down functions using the multiplex network master switch assembly and power window regulator switch assembly can operate all of the power windows.
Click here
OK:
Manual up and down functions are normal.
NG | GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) |
|
3. | CHECK REMOTE UP / DOWN FUNCTION |
(a) Check that the remote up and down functions using the multiplex network master switch assembly can operate all of the power windows.
Click here
OK:
Remote up and down functions are normal.
OK | REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
NG | GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Vehicle Stability Control System: Right Front Wheel Speed Sensor Circuit Intermittent (C05061F)
DESCRIPTION The speed sensor detects wheel speed and sends the appropriate signals to the skid control ECU (brake actuator assembly). These signals are used for brake control. Speed sensor rotors have rows of alternating N and S magnetic poles, and their magnetic fields change when the rotors turn. ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Automatic High Beam Main Switch: Inspection
INSPECTION PROCEDURE 1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (AUTOMATIC HIGH BEAM SWITCH) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 (+B) - 10 (E) Integration control and p ...