DESCRIPTION
This DTC is stored when a malfunction occurs in the stereo component amplifier assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15A3 | Stereo Component Amplifier Malfunction | When any of the following conditions is met:
| Stereo component amplifier assembly |
PROCEDURE
| 1. | CHECK DTC |
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTCs are output.
| OK | | USE SIMULATION METHOD TO CHECK |
| NG | | REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY |
AV Signal Stoppage (Low Battery Voltage) (B158F)
Display Malfunction (B15A6,B15B0)Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Charging System: Terminals Of Ecm
TERMINALS OF ECM CHECK ECM HINT: The standard normal voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard normal voltage for that pair of t ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Seat Belt Warning System: Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or state ...