ADJUSTMENT
PROCEDURE
1. ADJUST REAR WASHER NOZZLE
(a) Using a screwdriver, adjust the direction of the rear washer nozzle. NOTICE: Do not use a safety pin or other pointed tool. Doing so may damage the inside of the rear washer nozzle. |
|
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Air Conditioning Pressure Sensor: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT AIR CONDITIONER PRESSURE SENSOR (a) Check the wire harness. (1) Disconnect the A9 air conditioner pressure sensor connector. (2) Disconnect the J42 air conditioning amplifier assembly connector. (3) Measure the resistance according to the value(s) in the ta ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Yaw Rate And Acceleration Sensor: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during yaw rate sensor assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Ins ...