INSPECTION
PROCEDURE
1. INSPECT FRONT DOOR TRIM BOARD SUBASSEMBLY LH (FRONT DOOR AMBIENT ILLUMINATION LIGHT LH)
| (a) Apply battery voltage to the connector and check that the front door ambient illumination light LH comes on. OK:
If the result is not as specified, replace the front door trim board sub-assembly LH. |
|
2. INSPECT FRONT DOOR TRIM BOARD SUBASSEMBLY RH (FRONT DOOR AMBIENT ILLUMINATION LIGHT RH)
| (a) Apply battery voltage to the connector and check that the front door ambient illumination light RH comes on. OK:
If the result is not as specified, replace the front door trim board sub-assembly RH. |
|
Removal
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Drive Shaft Assembly: Reassembly
REASSEMBLY PROCEDURE 1. INSTALL FRONT DRIVE SHAFT BEARING (for RH Side) (a) Using SST, a steel plate and a press, install a new front drive shaft bearing. SST: 09527-10011 NOTICE: The bearing should be completely installed. *a Steel Plate (b) Using a snap ring expander, ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Camshaft Oil Control Valve (for Bank 2): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during camshaft timing gear bolt removal/installation are shown below. Necessary Procedures After Parts Removed ...