REMOVAL
PROCEDURE
1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
Click here
2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL
Click here
3. REMOVE DOOR ARMREST COVER LH
Click here
4. REMOVE COURTESY LIGHT ASSEMBLY
Click here
5. REMOVE FRONT DOOR NO. 1 STIFFENER CUSHION
Click here
6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Click here
7. REMOVE SEAT MEMORY SWITCH LH
| (a) Disengage the 4 claws to remove the seat memory switch LH from the front door trim board sub-assembly LH. |
|
Components
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Roof Headlining (w/o Rear No. 2 Seat): Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY Click here 2. REMOVE WASHER HOSE ASSEMBLY (a) Remove the washer hose assembly. *A for Standard Roof *B for Sliding Roof *C for Panoramic Moon Roof - - 3. REMOVE VANITY LIGHT ASSEMBLY HINT: Use the same procedu ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Pre-collision System: Lost Communication with Image Processing Module "A" Missing Message (U023A87)
DESCRIPTION The forward recognition camera communicates with the skid control ECU (brake actuator assembly) via CAN communication. If a communication error is detected between the skid control ECU (brake actuator assembly) and forward recognition camera, the forward recognition camera stores this DT ...