COMPONENTS
ILLUSTRATION
| *A | w/o Manual (SOS) Switch | *B | w/ Manual (SOS) Switch |
| *1 | ANTENNA CORD SUB-ASSEMBLY | *2 | NO. 2 SIDE DEFROSTER NOZZLE DUCT |
| *3 | NO. 4 HEATER TO REGISTER DUCT | - | - |
ILLUSTRATION
| *A | for Standard Roof | *B | w/o Satellite Radio |
| *C | w/ Satellite Radio | - | - |
| *1 | NO. 2 ANTENNA CORD SUB-ASSEMBLY | *2 | NO. 5 ANTENNA CORD SUB-ASSEMBLY |
| *3 | NO. 6 ANTENNA CORD SUB-ASSEMBLY | *4 | ROOF HEADLINING ASSEMBLY |
ILLUSTRATION
| *A | for Sliding Roof | *B | w/o Satellite Radio |
| *C | w/ Satellite Radio | - | - |
| *1 | NO. 2 ANTENNA CORD SUB-ASSEMBLY | *2 | NO. 5 ANTENNA CORD SUB-ASSEMBLY |
| *3 | NO. 6 ANTENNA CORD SUB-ASSEMBLY | *4 | ROOF HEADLINING ASSEMBLY |
ILLUSTRATION
| *1 | BACK DOOR LOCK COVER | *2 | BACK DOOR TRIM BASE |
| *3 | BACK DOOR TRIM COVER LH | *4 | BACK DOOR TRIM COVER RH |
| *5 | BACK DOOR TRIM PANEL ASSEMBLY | *6 | BACK WINDOW UPPER PANEL TRIM |
| *7 | DOOR PULL HANDLE | *8 | NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY |
| *9 | NO. 3 ANTENNA CORD SUB-ASSEMBLY | *10 | NO. 4 ANTENNA CORD SUB-ASSEMBLY |
| N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
| *T1 | for Type A: 8.35 (85, 74 in.*lbf) for Type B: 10 (102, 7) | - | - |
RemovalLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Lighting System (w/o Automatic Headlight Beam Level Control System): Daytime Running Light Relay Circuit
DESCRIPTION The main body ECU (multiplex network body ECU) controls the daytime running lights. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
Inspect the fuses for circuits related to this system before performing the following procedure.
Before replacing the main body ECU (multiplex network ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Seat Assembly (for 60/40 Split Seat Type Lh Side): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear seat assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Install ...