CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Click here
PROCEDURE
1. | CHECK OPERATION |
(a) Press the disc eject switch of the radio receiver assembly for 5 seconds or more and check that the disc is ejected.
OK:
Disc is ejected.
NG | ![]() | REPLACE RADIO RECEIVER ASSEMBLY |
|
2. | REPLACE DISC AND RECHECK |
(a) Replace the disc with a new or known good one and check that the malfunction disappears.
OK:
Disc is ejected.
OK | ![]() | END (DISC WAS FAULTY) |
NG | ![]() | REPLACE RADIO RECEIVER ASSEMBLY |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Automatic Transaxle System: Road Test
ROAD TEST PROBLEM SYMPTOM CONFIRMATION (a) Based on the result of the customer problem analysis, try to reproduce the symptoms. If the problem is that the transaxle does not shift up, shift down, or the shift point is too high or too low, conduct the following road test referring to the automatic sh ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Evaporator Temperature Sensor: Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 2 AIR CONDITIONING HARNESS ASSEMBLY (a) Engage the 2 claws to install the No. 2 air conditioning harness assembly. (b) Install the rear cooling unit cover LH to the rear cooling unit cover RH with the 12 screws. (c) Engage each clamp. 2. INSTALL HEATER RADIATOR ...