Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Propeller Shaft Assembly Symptom | Suspected Area | Link |
---|---|---|
Noise or Vibration | Spider bearing (Worn or stuck) | |
Intermediate shaft (Runout) | | |
Universal joint flange*a (Runout) | | |
Universal joint flange*b (Runout) | | |
Propeller shaft (Runout) | | |
Rear propeller shaft (Runout) | | |
Center support bearing | ![]() | |
Joint angle | ![]() |
*a: for Front Side
*b: for Rear Side
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Steering Wheel: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the steering wheel assembly removal/installation are shown below. Necessary Procedure After Parts Removed/ ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blind Spot Monitor System: Power Source Circuit
DESCRIPTION This circuit provides power to operate the blind spot monitor sensor. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure. PROCEDURE 1. CHECK HARNESS AND CONNECTOR (BLIND SPOT MONITOR SENSOR ...