Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL SHIFT POSITION INDICATOR

(a) Install the shift position indicator and console box bracket to the upper console panel sub-assembly with the 2 screws.

*1

Console Box Bracket

*2

Shift Position Indicator

2. INSTALL ELECTRIC PARKING BRAKE SWITCH ASSEMBLY

Click here

    Inspection
    INSPECTION PROCEDURE 1. INSPECT SHIFT LOCK CONTROL ECU HINT: If the results of the following inspections are as specified but a malfunction has occurred, replace the transmission floor shift assembly. ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY NOTICE: Check that the park/neutral position switch assembly and the shift lever are in neutral. (a) Temporarily install the tran ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Seat Position Sensor: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the seat position airbag sensor removal/installation are shown below. Necessary Procedure After Parts Remo ...

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Light Assembly: Reassembly
    REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR LIGHT LENS AND BODY (for Bulb Type Turn Signal Light) 2. INSTALL LICENSE PLATE LIGHT SHADE (a) for Bulb Type Turn Signal Light ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2026 Copyright www.lexusrx.net
    0.0119