ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when inspecting the cooling fan system.
PROCEDURE
1. INSPECT COOLING FAN MOTOR RH
CAUTION:
To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when inspecting the cooling fan system.
(a) Disconnect the cooling fan motor RH connector.
| (b) Check that the cooling fan motor RH operates smoothly when the battery is connected to the cooling fan motor RH connector. |
|
(c) Measure the current while the cooling fan motor RH is operating.
Standard Current:
| Motor Type | Condition | Specified Condition |
|---|---|---|
| Cooling Fan Motor 100 W Type | Battery voltage applied at 20°C (68°F) | 18.0 to 24.0 A |
| Cooling Fan Motor 200 W Type | 26.0 to 32.0 A |
If the result is not as specified, replace the cooling fan motor RH.
(d) Connect the cooling fan motor RH connector.
2. INSPECT COOLING FAN MOTOR LH
CAUTION:
To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when inspecting the cooling fan system.
(a) Disconnect the cooling fan motor LH connector.
| (b) Check that the cooling fan motor LH operates smoothly when the battery is connected to the cooling fan motor LH connector. |
|
| (c) Confirm the code mark on the cooling fan motor LH. |
|
(d) Measure the current while the cooling fan motor LH is operating.
Standard Current:
| Code Mark | Condition | Specified Condition |
|---|---|---|
| S | Battery voltage applied at 20°C (68°F) | 18.0 to 24.0 A |
| M | 26.0 to 32.0 A |
If the result is not as specified, replace the cooling fan motor LH.
(e) Connect the cooling fan motor LH connector.
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Blind Spot Monitor System: Power Source Circuit
DESCRIPTION This circuit provides power to operate the blind spot monitor sensor. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure. PROCEDURE 1. CHECK HARNESS AND CONNECTOR (BLIND SPOT MONITOR SENSOR ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Brake Pedal: Installation
INSTALLATION PROCEDURE 1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY (a) Install the brake pedal support assembly with the 4 nuts. Torque: 14 N·m {143 kgf·cm, 10 ft·lbf} (b) Install the brake pedal support assembly to the instrument panel reinforcement assembly with the 2 bolts. Torque: 19.1 N·m {19 ...