COMPONENTS
ILLUSTRATION
| *1 | VVT SENSOR (for Intake Side of Bank 1) | *2 | VVT SENSOR (for Exhaust Side of Bank 1) |
| *3 | VVT SENSOR (for Intake Side of Bank 2) | *4 | VVT SENSOR (for Exhaust Side of Bank 2) |
| N*m (kgf*cm, ft.*lbf): Specified torque | | Adhesive 1324 |
| ★ | Precoated part | - | - |
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Charging System: Charging Failure
PROCEDURE 1. CHECK GENERATOR PULLEY WITH CLUTCH (ON-VEHICLE INSPECTION) (a) Start the engine and visually check that the generator rotor assembly (fan) in the generator assembly is operating. OK: The generator rotor assembly (fan) is operating. NG REPLACE GENERATOR PULLEY WITH CLUTC ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Bumper (w/ Rear No. 2 Seat): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL REAR BUMPER UPPER RETAINER LH (a) Engage the 2 guides as shown in the illustration to install the rear bumper upper retainer LH to the rear combination light assembly LH. Install in this Direction (b) Engage the grommet. (c) Engage the guide and pin as shown ...