INSTALLATION
PROCEDURE
1. INSTALL NO. 2 VACUUM SWITCHING VALVE ASSEMBLY
(a) Install the No. 2 vacuum switching valve assembly to the front engine mounting bracket with the bolt.
Torque:
20 N·m {204 kgf·cm, 15 ft·lbf}
(b) Connect the No. 2 vacuum switching valve assembly connector.
(c) Connect the 2 vacuum hoses to the No. 2 vacuum switching valve assembly.
2. INSTALL INLET AIR CLEANER ASSEMBLY
(a) Install the inlet air cleaner assembly to the air cleaner case sub-assembly with the 2 bolts.
Torque:
8.0 N·m {82 kgf·cm, 71 in·lbf}
3. INSTALL COOL AIR INTAKE DUCT SEAL
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Audio And Visual System (for 8 Inch Display): Pointer Displayed/not Displayed Repeatedly
WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
Inspect the fuses for circuits r ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Panoramic Moon Roof System: System Diagram
SYSTEM DIAGRAM Communication Table Sender Receiver Signal Line Main Body ECU (Multiplex Network Body ECU) Sliding Roof ECU (Sliding Roof Drive Gear Assembly)
Sliding roof operation permission signal
IG signal
Front door courtesy light switch assembly signal
Vehicle speed ...