INSTALLATION
PROCEDURE
1. INSTALL CRUISE CONTROL MAIN SWITCH
(a) Connect the connector.
| (b) Pass the cruise control switch wire under the rib as shown in the illustration, and temporarily install the cruise control main switch with the 2 screws. |
|
(c) Tighten the 2 screws to install the cruise control main switch.
Torque:
2.4 N·m {24 kgf·cm, 21 in·lbf}
HINT:
Tighten the screws in the order shown in the illustration.
2. INSTALL HORN BUTTON ASSEMBLY
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Steering System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table.
Check each symptom by checking the suspe ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Lighting System (w/ Automatic Headlight Beam Level Control System): Light Sensor Circuit (B1244)
DESCRIPTION The automatic light control sensor detects ambient light. The sensor creates an electrical signal based on the amount of light detected, and sends the signal to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) turns on or off the headlights a ...