DESCRIPTION
The forward recognition camera receives the vehicle information from the ECM via CAN communication.
If the forward recognition camera cannot store the vehicle information sent from the ECM, it stores DTC U030051.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U030051 | Internal Control Module Software Incompatibility Not Programmed | While the lane control system is on, the vehicle information sent from ECM remains undefined. | Front camera system |
PROCEDURE
| 1. | GO TO FRONT CAMERA SYSTEM |
HINT:
If DTC U030051 is output by the lane control system, perform troubleshooting for the front camera system.
Click here
| NEXT | | END |
Lost Communication with Cruise Control Front Distance Range Sensor Single Sensor or Center Missing Message (U023587)
Internal Control Module Software Incompatibility Invalid / Incompatible Software Component (U030057)Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Center Seat Outer Belt Assembly(w/ Rear No. 2 Seat): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear center seat outer belt assembly removal/installation are shown below. Necessary Procedure After Par ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic Transaxle System: Shift Paddle Switch Circuit
DESCRIPTION When the shift lever is in D, operating the "-" (down shift) shift paddle switch will cause the transaxle to enter fixed range mode which restricts the highest gear. By operating the "+" (up shift) or "-" (down shift) shift paddle switch, the gear can be changed. When the vehicle is bein ...