Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Precaution

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual / Engine & Hybrid System / Cruise Control / Road Sign Assist System / Precaution

PRECAUTION

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

System Name

See Procedure

Lane Control System

Pre-collision System

Intelligent Clearance Sonar System

Parking Assist Monitor System

Panoramic View Monitor System

Lighting System (w/ Automatic Headlight Beam Level Control System)

Power Door Lock Control System

Power Back Door System (w/ Outside Door Control Switch)

HANDLING PRECAUTION FOR ROAD SIGN ASSIST SYSTEM

(a) The system may not detect traffic signs under the following conditions:

  • The forward recognition camera is misaligned.
  • Dirt, snow, ice or a sticker is on the windshield glass in front of the forward recognition camera.
  • The windshield glass in front of the forward recognition camera is fogged up.
  • The vehicle is significantly tilted.
  • Driving in bad weather (heavy rain or snow, or dense fog), or water etc., is kicked up the preceding vehicle.
  • The headlights of an oncoming vehicle or sunlight is shining directly on the forward recognition camera.
  • A very bright light from reflective objects, such as a road sign, road surface, another vehicle, etc., is shining directly into the lens of the forward recognition camera.
  • The road sign is dirty, faded, tilted, or has a sticker attached.
  • The sign is dirty, faded or tilted, or the contrast of an electronic sign is poor.
  • Whole or part of the sign is blocked by an object.
  • The vehicle passes the sign too quickly after the sign comes into view.
  • When in low light conditions or when the surrounding brightness changes suddenly.
  • The sign is located immediately after a right or left turn.
  • The sign is posted in a position too far away from the forward recognition camera.
  • The sign is posted in a position that is too low compared to the vehicle.
  • The sign is posted on the opposite side of an intersection or curve.

(b) The system may incorrectly recognize traffic signs under the following conditions:

  • A sign is on an adjacent lane or side road, or immediately after traffic lanes merge or diverge.
  • A sticker or graphic is on the rear of a preceding vehicle.
  • An object which is not a traffic sign is similar in appearance.
  • When there are multiple signs
  • When a sign for certain kinds of vehicles, such as trucks, is detected.

TROUBLESHOOTING PRECAUTIONS

(a) If a terminal contact point malfunction or part installation problem occurs, removal and reinstallation of the suspected part may return the system to normal. However, be aware that the normal condition may only be temporary.

(b) Before disconnecting connectors or removing/installing parts, determine the malfunctioning area by checking and writing down the vehicle condition at the time the malfunction occurred (DTC outputs etc.).

(c) Be sure to check for DTCs related to other systems. The road sign assist system may be influenced by malfunctions in other systems.

HANDLING PRECAUTIONS

(a) Make sure that the engine switch is off unless otherwise specified in the inspection procedure.

(b) After removal/installation, check for DTCs and confirm that a normal system code is output.

REPLACEMENT PRECAUTIONS

(a) Forward Recognition Camera:

(1) If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform forward recognition camera adjustment.

HINT:

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

One Time Recognition: Click here

Sequential Recognition: Click here

(2) When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.

(3) When replacing the forward recognition camera, do not damage the camera lens or allow it to become contaminated with foreign matter.

HINT:

If the forward recognition camera lens is touched, replace the forward recognition camera with a new one.

(4) Do not reuse a forward recognition camera that has been dropped or subjected to a strong impact.

(b) Windshield Glass:

(1) When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Lexus genuine part. If a non-Lexus genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or the road sign assist system may not operate properly due to a difference in the transmissivity or black ceramic border.

(2) Do not attach stickers, including transparent stickers, or other items to the outer side of the windshield glass within the area in front of the forward recognition camera.

    Road Sign Assist System
    ...

    Parts Location
    PARTS LOCATION ILLUSTRATION *1 MILLIMETER WAVE RADAR SENSOR ASSEMBLY *2 FORWARD RECOGNITION CAMERA *3 SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY) *4 ECM ILLUSTRATION *A for ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Window Regulator Motor (for Rear Door): Components
    COMPONENTS ILLUSTRATION *1 COURTESY LIGHT ASSEMBLY *2 REAR DOOR ARMREST COVER *3 REAR DOOR INSIDE HANDLE BEZEL PLUG *4 REAR DOOR TRIM BOARD SUB-ASSEMBLY *5 REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR UPPER ARMREST BASE PANEL - - ILLUSTRATION *1 P ...

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic Transaxle System: Torque Converter Clutch Pressure Control Solenoid Control Actuator Stuck Off (P27567F)
    DESCRIPTION The ECM controls the shift solenoid valve SLU using a predetermined current, and performs lock-up and flex lock-up control. The ECM compares the engagement condition of the lock-up clutch with the lock-up schedule in the ECM memory to detect mechanical malfunctions of the shift solenoid ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2026 Copyright www.lexusrx.net
    0.0154