Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Precaution

NOTICE:

• Check that the battery cables are connected to the correct terminals.
• Disconnect the battery cables when the battery is given a quick charge.
• Do not perform tests with a high voltage insulation resistance tester.
• Never disconnect the battery cables while the engine is running.
• Check that the charging cable nuts are tightened on terminal B of the generator assembly and on the engine room relay block and junction block assembly.

Charging System

...

Parts Location

PARTS LOCATION ILLUSTRATION *A for 150 A Type - - *1 GENERATOR ASSEMBLY *2 ENGINE ROOM RELAY BLOCK AND JUNCTION BLOCK ASSEMBLY - EFI-MAIN FUSE - ALT FUSE *3 ECM - - IL ...

Other materials:

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Vehicle Stability Control System: Yaw Rate Sensor Signal Stuck In Range (C00632A,C05201C,C05202A,C052096)
DESCRIPTION for Optitron Meter Type: The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition. These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration s ...

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Generator (for 150 A Type): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL GENERATOR DRIVE END FRAME BEARING (a) Using SST and a press, install a new generator drive end frame bearing. SST: 09950-60010 09951-00470 SST: 09950-70010 09951-07100 (b) Fit the tabs of the retainer plate into the cutouts of the generator drive end ...