SYSTEM DESCRIPTION
LIN COMMUNICATION SYSTEM DESCRIPTION
The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication such as when there is an open or short in a communication line, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.
HINT:
| Component | Master Control | LIN Communication DTC Output Function |
|---|---|---|
| Main Body ECU (Multiplex Network Body ECU) | ○ | ○ |
| Power Window Regulator Motor Assembly (for Driver Door) | - | - |
| Power Window Regulator Motor Assembly (for Front Passenger Door) | - | - |
| Power Window Regulator Motor Assembly (for Rear LH Door) | - | - |
| Power Window Regulator Motor Assembly (for Rear RH Door) | - | - |
| Multiplex Network Master Switch Assembly | - | - |
| Sliding Roof ECU (Sliding Roof Drive Gear Sub-assembly)*1 | - | - |
| Sliding Roof ECU (Sliding Roof Drive Gear Assembly)*2 | - | - |
| Roof Sunshade ECU (Sliding Roof Drive Gear Assembly)*2 | - | - |
| Component | Master Control | LIN Communication DTC Output Function |
|---|---|---|
| Certification ECU (Smart Key ECU Assembly) | ○ | ○ |
| Steering Lock ECU (Steering Lock Actuator or Upper Bracket Assembly) | - | - |
| ID Code Box (Immobiliser Code ECU) | - | - |
System Diagram
How To Proceed With TroubleshootingLexus RX (RX 350L, RX450h) 2016-2026 Owners Manual > Adjusting the seats: Front seats
Adjustment procedure
Seat position adjustment switch
Seat cushion (front) angle adjustment
switch
Vertical height adjustment switch
Seatback angle adjustment switch
Lumbar support firmness adjustment
switch
Lumbar support height adjustment
switch (if equipped)
Seat cushion leng ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Hood Lock Control Cable Assembly: Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY Click here 2. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Click here 3. REMOVE HOOD LOCK CONTROL CABLE COVER (a) Remove the screw. (b) Disengage the clamp and remove the hood lock control cable cover. 4. REMOVE HOOD LO ...