CUSTOMIZE PARAMETERS
DRIVE MODE CUSTOMIZATION
"CUSTOMIZE" settings can be changed on the screen of the multi-display.
HINT:
"CUSTOMIZE" mode can be selected by using the drive mode select switch (combination switch assembly).
(a) Turn the engine switch on (IG).
(b) Select the following menus on the multi-display to enter the customize setting screen: Menu / Setup / Vehicle
Drive Mode Customization| Display | Content | Default | Setting |
|---|---|---|---|
| POWER TRAIN | Acceleration response, etc. | NORMAL | POWER / NORMAL / ECO |
| CHASSIS | Damping force of suspension, steering assist force, etc. | NORMAL | SPORT / NORMAL |
| CLIMATE | Effectiveness of air conditioning system, etc. | NORMAL | NORMAL / ECO |
Calibration
Data List / Active TestLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Safety Connect System: Initialization
INITIALIZATION RESET BACK-UP BATTERY CONDITION HINT: If the back-up battery (mobilephone battery) has been replaced, it is necessary to perform the Reset Backup Battery Condition procedure. (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Ch ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Yaw Rate And Acceleration Sensor: Installation
INSTALLATION PROCEDURE 1. INSTALL YAW RATE SENSOR ASSEMBLY (a) Install the yaw rate sensor assembly with the 2 bolts. Torque: 14.5 N·m {148 kgf·cm, 11 ft·lbf} NOTICE:
Do not drop the yaw rate sensor assembly.
If the yaw rate sensor assembly is dropped, replace it with a new one.
(b) Conn ...