CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
PROCEDURE
1. | REPLACE CD AND RECHECK |
(a) Replace the CD with a new or known good one and check that the malfunction disappears.
OK:
Malfunction disappears.
OK | ![]() | END |
|
2. | CHECK NOISE CONDITION |
(a) Check that noise is output from the speakers when a disc is inserted and is being read.
OK:
Noise is output.
OK | ![]() | REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY |
NG | ![]() | REPLACE RADIO RECEIVER ASSEMBLY |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blind Spot Monitor System: Lost Communication with Blind Spot Monitor Slave Module (U0232)
DESCRIPTION This DTC is stored when the blind spot monitor sensor LH judges that there is a communication problem with the blind spot monitor sensor RH. DTC No. Detection Item DTC Detection Condition Trouble Area U0232 Lost Communication with Blind Spot Monitor Slave Module The blin ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blower Unit: Installation
INSTALLATION PROCEDURE 1. INSTALL CLEAN AIR FILTER (a) Engage the 4 guides as indicated by the arrows, in the order shown in the illustration to install the clean air filter to the air filter case. Install in this Direction (1) Install in this Direction (2) NOTICE: Make sure that the ...