CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
PROCEDURE
1. | CHECK OPERATION |
(a) Press the disc eject switch of the radio receiver assembly for 5 seconds or more and check that the CD is ejected.
OK:
CD is ejected.
NG | ![]() | REPLACE RADIO RECEIVER ASSEMBLY |
|
2. | REPLACE CD AND RECHECK |
(a) Replace the CD with a new or known good one and check that the malfunction disappears.
OK:
CD is ejected.
OK | ![]() | END (CD WAS FAULTY) |
NG | ![]() | REPLACE RADIO RECEIVER ASSEMBLY |
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Parking Assist Monitor System: Reverse Signal Circuit
DESCRIPTION The multi-display assembly receives a reverse signal from the park/neutral position switch assembly*1 or clearance warning ECU assembly*2. *1: except 12.3 Inch Display and w/ Intuitive Parking Assist System *2: for 12.3 Inch Display and w/ Intuitive Parking Assist System WIRING DIAGRAM ...
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Pre-collision System Warning Buzzer: Inspection
INSPECTION PROCEDURE 1. INSPECT SKID CONTROL BUZZER ASSEMBLY (a) Make sure that there is no looseness in the locking part and connecting part of the connector. (b) Disconnect the skid control buzzer assembly connector. (c) Check the connector and terminals for deformation and corrosio ...