DIAGNOSIS SYSTEM
DESCRIPTION
(a) When troubleshooting a vehicle with the diagnostic system, the only difference from the usual troubleshooting procedure is connecting the Techstream to the vehicle and reading various data output from the multiplex tilt and telescopic ECU.
The multiplex tilt and telescopic ECU stores DTCs when the ECU detects a malfunction in itself or in its circuits.
To check the DTCs, connect the Techstream to the DLC3 on the vehicle. The Techstream enables the DTCs to be cleared, several actuators to be activated, and the freeze frame data and various forms of steering data to be checked.
CHECK DLC3
(a) Check the DLC3.
Click here
Data List / Active Test
Diagnostic Trouble Code ChartLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Starter: Inspection
INSPECTION PROCEDURE 1. INSPECT STARTER ASSEMBLY CAUTION: As a large electric current passes through the cable during this inspection, a thick cable must be used. If not, the cable may become hot and cause injury. NOTICE: Perform each of the following tests within 3 to 5 seconds to prevent the coil ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Fuel Pressure Sensor (for High Pressure): Installation
INSTALLATION PROCEDURE 1. INSTALL FUEL PIPE PLUG SUB-ASSEMBLY (a) Install a new O-ring, new No. 1 fuel injector back-up ring, new No. 2 fuel injector back-up ring and new No. 3 fuel injector back-up ring to the fuel pipe plug sub-assembly as shown in the illustration. *1 Fuel Pipe Plug Sub-ass ...