DIAGNOSTIC TROUBLE CODE CHART
Power Tilt and Power Telescopic Steering Column System| DTC No. | Detection Item | DTC Detection Condition | Link |
|---|---|---|---|
| B2603 | Tilt and Telescopic Manual Switch Circuit Malfunction | When operating the tilt and telescopic switch, an abnormal voltage value is sent to the multiplex tilt and telescopic ECU. | |
| B2610 | Tilt Position Sensor or Tilt Motor Circuit Malfunction | Tilt operation stops within the operation range while operating. | |
| B2611 | Telescopic Position Sensor or Telescopic Motor Circuit Malfunction | Telescopic operation stops within the operation range while operating. | |
| B2620 | ECU Power Source Circuit Malfunction | The voltage of the ECU power source drops to 8 V or less and this condition continues for 10 seconds or more. | |
| B2624 | Vehicles Speed Malfunction |
| |
| U0142 | Lost Communication with Main Body ECU | Lost communication with main body ECU (multiplex network body ECU) | |
| U0208 | Lost Communication with "Seat Control Module A" | Lost communication with position control ECU and switch assembly LH | |
Diagnosis System
Dtc Check / ClearLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Brake System Control Module "A" System Voltage System Voltage High (C137BA3)
DESCRIPTION If a malfunction is detected in the power supply circuit, the skid control ECU (brake actuator assembly) stores this DTC and the fail-safe function prohibits ABS operation. This DTC is stored when the +BS terminal voltage deviates due to a malfunction in the power supply or charging circ ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Fuel Injector (for Direct Injection): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fuel injector assembly removal/installation are shown below. Necessary Procedures After Parts Removed/In ...