PROBLEM SYMPTOMS TABLE
HINT:
Symptom | Suspected Area | Link |
---|---|---|
Only manual switch does not operate | Tilt and telescopic manual switch circuit |
|
Multiplex tilt and telescopic ECU |
| |
Only auto away/return function does not operate | Check customize status of auto away/return function using the Techstream |
|
IG power source circuit |
| |
Multiplex tilt and telescopic ECU |
| |
Only auto away function does not operate | Entry and start system (for start function) |
|
Multiplex tilt and telescopic ECU |
| |
Only auto return function does not operate | Entry and start system (for start function) |
|
Multiplex tilt and telescopic ECU |
| |
Only memory function does not operate | Front power seat control system |
|
Position Control ECU and Switch Assembly LH |
| |
Multiplex tilt and telescopic ECU |
| |
Memory call function does not operate | Front power seat control system |
|
Power mirror control system |
| |
Multiplex tilt and telescopic ECU |
|
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Brake Actuator: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3 with the engine switch off. (b) Start the engine and run it at idle. (c) Turn the Techstream on. (d) Enter the following menus: Chassis / Brake/EPB / Active Test. HINT: Refer to the Techstream operator's man ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Automatic Transaxle System: Pressure Control Solenoid "G" Actuator Stuck Off (P28077F)
DESCRIPTION Based on signals from the transmission revolution sensors (NT, NC3 and NC), the actual gear is detected. The ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical malfunction of the shift solenoid valves, transmission valve body assembly and automati ...