CUSTOMIZE PARAMETERS
DRIVE MODE CUSTOMIZATION
"CUSTOMIZE" settings can be changed on the screen of the multi-display.
HINT:
"CUSTOMIZE" mode can be selected by using the drive mode select switch (combination switch assembly).
(a) Turn the engine switch on (IG).
(b) Select the following menus on the multi-display to enter the customize setting screen: Menu / Setup / Vehicle
Drive Mode Customization| Display | Content | Default | Setting |
|---|---|---|---|
| POWER TRAIN | Acceleration response, etc. | NORMAL | POWER / NORMAL / ECO |
| CHASSIS | Damping force of suspension, steering assist force, etc. | NORMAL | SPORT / NORMAL |
| CLIMATE | Effectiveness of air conditioning system, etc. | NORMAL | NORMAL / ECO |
Calibration
Data List / Active TestLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Shift Paddle Switch: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during shift paddle switch (transmission shift switch assembly) removal/installation are shown below. Necessary ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Brake Warning Light Remains ON
DESCRIPTION This procedure is for troubleshooting when the brake warning light remains on but no DTCs are output. The skid control ECU (brake actuator assembly) controls the brake warning light in the combination meter assembly via CAN communication. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: ...