DIAGNOSIS SYSTEM
DESCRIPTION
(a) When troubleshooting a vehicle with the diagnostic system, the only difference from the usual troubleshooting procedure is connecting the Techstream to the vehicle and reading various data output from the multiplex tilt and telescopic ECU.
The multiplex tilt and telescopic ECU stores DTCs when the ECU detects a malfunction in itself or in its circuits.
To check the DTCs, connect the Techstream to the DLC3 on the vehicle. The Techstream enables the DTCs to be cleared, several actuators to be activated, and the freeze frame data and various forms of steering data to be checked.
CHECK DLC3
(a) Check the DLC3.
Click here
Data List / Active Test
Diagnostic Trouble Code ChartLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Camshaft: Installation
INSTALLATION PROCEDURE 1. SET NO. 1 CYLINDER TO TDC (COMPRESSION) (a) Confirm that the timing mark (cutout) on the crankshaft pulley is aligned with the "0" timing mark of the timing chain cover assembly. *a Timing Mark (Cutout) *b "0" Timing Mark 2. SET CAMSHAFT TIM ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Blind Spot Monitor System: Short to +B in Outer Mirror Indicator(Master) (C1AB0)
DESCRIPTION This DTC is stored when the blind spot monitor sensor LH detects a short to +B in the outer rear view mirror indicator LH. DTC No. Detection Item DTC Detection Condition Trouble Area C1AB0 Short to +B in Outer Mirror Indicator(Master) Both of the following conditions ar ...