DESCRIPTION
The multiplex tilt and telescopic ECU receives signals from the main body ECU (multiplex network body ECU) and position control ECU and switch assembly LH via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0142 | Lost Communication with Main Body ECU | Lost communication with main body ECU (multiplex network body ECU) |
|
| U0208 | Lost Communication with "Seat Control Module A" | Lost communication with position control ECU and switch assembly LH |
|
PROCEDURE
| 1. | GO TO CAN COMMUNICATION SYSTEM |
(a) Go to CAN Communication System.
Click here
| NEXT | | END |
Tilt and Telescopic Manual Switch CircuitLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Height Control Sensor: Inspection
INSPECTION PROCEDURE 1. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (a) Connect 3 dry cell batteries (1.5 V) in series. NOTICE: Do not use rechargeable batteries as they may not output a voltage of 1.5 V. *a Component without harness connected (Rear Height Control Sensor Sub-assembly RH ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Mass Air Flow Meter: Inspection
INSPECTION PROCEDURE 1. INSPECT MASS AIR FLOW METER SUB-ASSEMBLY (a) Perform a visual check for any foreign matter on the intake air temperature sensor (thermistor) of the mass air flow meter sub-assembly shown in the illustration. OK: There is no foreign matter. If the result is not as specifie ...