REASSEMBLY
PROCEDURE
1. INSTALL HOOD STAY BRACKET LH
Click here
2. INSTALL HOOD SUPPORT ASSEMBLY LH
Click here
3. INSTALL HOOD STAY BRACKET RH
HINT:
Use the same procedure as for the LH side.
4. INSTALL HOOD SUPPORT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
5. CONNECT WASHER HOSE ASSEMBLY
(a) Engage the 5 clamps to connect the washer hose assembly. |
|
6. INSTALL WASHER NOZZLE SUB-ASSEMBLY
Click here
7. INSPECT WASHER NOZZLE SUB-ASSEMBLY
Click here
8. ADJUST WASHER NOZZLE SUB-ASSEMBLY
Click here
9. INSTALL HOOD INSULATOR
(a) Install the hood insulator with 8 new hood insulator clips. |
|
10. INSTALL HOOD TO RADIATOR SUPPORT SEAL
(a) Install the hood to radiator support seal with 10 new hood to radiator support seal clips. |
|
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Front Radar Sensor System: Terminals Of Ecu
TERMINALS OF ECU CHECK MILLIMETER WAVE RADAR SENSOR ASSEMBLY NOTICE:
DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the Techstream once the inspection has been completed.
Do not apply excessive force to the forward recognition ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Safety Connect System: Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of ...