INSPECTION
PROCEDURE
1. INSPECT POWER BACK DOOR SENSOR ASSEMBLY LH
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the power back door sensor assembly LH. |
|
2. INSPECT POWER BACK DOOR SENSOR ASSEMBLY RH
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the power back door sensor RH. |
|
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Vehicle Stability Control System: Brake Actuator Operation Sound is Loud during Initial Check
CAUTION / NOTICE / HINT NOTICE: After replacing the skid control ECU (brake actuator assembly), perform "Calibration". Click here PROCEDURE 1. PERFORM ROAD TEST (a) After turning the engine switch on (IG), compare the operating sound of the brake actuator the first time the vehicle speed ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Quarter Trim Speaker (w/o Rear No. 2 Seat): Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL QUARTER SIDE SPEAKER ASSEMBLY NOTICE: Do not touch the speaker cone. (a) Connect the connector. (b) Engage the clip to temporarily i ...