REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL HEADLIGHT UNIT
2. INSTALL HEADLIGHT GASKET (w/ Automatic Headlight Beam Level Control System)
Click here
3. INSTALL NO. 1 HEADLIGHT ECU SUB-ASSEMBLY (w/ Automatic Headlight Beam Level Control System)
Click here
4. INSTALL FRONT SIDE MARKER LIGHT SOCKET (for Bulb Type Turn Signal Light)
5. INSTALL FRONT SIDE MARKER LIGHT BULB (for Bulb Type Turn Signal Light)
(a) Install the front side marker light bulb to the front side marker light socket.
(b) Turn the front side marker light socket with the front side marker light bulb as shown in the illustration to install them as a unit.
| Install in this Direction |
(c) Connect the connector.
6. INSTALL FRONT TURN SIGNAL LIGHT SOCKET (for Bulb Type Turn Signal Light)
7. INSTALL FRONT TURN SIGNAL LIGHT BULB (for Bulb Type Turn Signal Light)
(a) Install the front turn signal light bulb to the front turn signal light socket.
(b) Turn the front turn signal light socket with the front turn signal light bulb as shown in the illustration to install them as a unit.
| Install in this Direction |
(c) Connect the connector.
Adjustment
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Seat Heater Control(for Rear Side): Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the seat frame may injure your hands. PROCEDURE 1. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (w/o Rear No. 2 Seat) (a) for 60/40 Split Seat Type RH Side: (1) Engage the 2 clamps to install the seat heater control sub ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Generator (for 150 A Type): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL GENERATOR DRIVE END FRAME BEARING (a) Using SST and a press, install a new generator drive end frame bearing. SST: 09950-60010 09951-00470 SST: 09950-70010 09951-07100 (b) Fit the tabs of the retainer plate into the cutouts of the generator drive end ...