INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL HEADLIGHT ASSEMBLY
(a) w/ Automatic Headlight Beam Level Control System:
(1) Engage the clamp.
(2) Connect the connector and raise the connector lock lever to engage the claw and lock the connector as shown in the illustration.
| *a | Connector Lock Lever |
| Connect in this Direction |
(b) w/o Automatic Headlight Beam Level Control System:
(1) Connect the 3 connectors.
(2) Engage the 3 clamps.
(c) Engage the guide to temporarily install the headlight assembly as shown in the illustration.
| Install in this Direction |
(d) Pull back the front fender reinforcement sub-assembly top and install the screw as shown in the illustration.
| *a | Bolt <A> |
| *b | Bolt <B> |
| *c | Screw |
| Pull Back in this Direction |
(e) Install the headlight assembly with the 2 bolts <A> and bolt <B>.
Torque:
7.0 N·m {71 kgf·cm, 62 in·lbf}
(f) Remove the protective tape.
2. INSTALL FRONT FENDER REINFORCEMENT SUB-ASSEMBLY TOP
(a) Engage the 2 claws and 2 guides.
(b) Install the front fender reinforcement sub-assembly top with the center hood cushion and clip.
3. INSTALL FRONT BUMPER ASSEMBLY
Click here
4. PERFORM INITIALIZATION
Click here
5. ADJUST HEADLIGHT AIMING
Click here
Reassembly
RepairLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Seat Cushion Heater: Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (for Standard Se ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vacuum Switching Valve (for Acis): Components
COMPONENTS ILLUSTRATION *1 NO. 1 VACUUM SWITCHING VALVE ASSEMBLY (for ACIS) *2 VACUUM HOSE SUB-ASSEMBLY *3 V-BANK COVER SUB-ASSEMBLY - - N*m (kgf*cm, ft.*lbf): Specified torque - - ...