DISASSEMBLY
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE REAR COMBINATION LIGHT CAP (for LED Type Turn Signal Light)
(a) for TMMC Made:
(1) Remove the rear combination light cap. HINT: Use the same procedure for all rear combination light caps. |
|
2. REMOVE REAR TURN SIGNAL LIGHT BULB (for Bulb Type Turn Signal Light)
(a) Turn the rear light cord with the rear turn signal light bulb as shown in the illustration to disconnect them as a unit.
![]() | Remove in this Direction |
(b) Remove the rear turn signal light bulb from the rear light cord.
3. REMOVE REAR LIGHT CORD (for Bulb Type Turn Signal Light)
(a) Turn the rear light cord as shown in the illustration to disconnect them as a unit.
![]() | Remove in this Direction |
(b) Disconnect the connector to remove the rear light cord. |
|
4. REMOVE REAR COMBINATION LIGHT BRACKET (for Bulb Type Turn Signal Light)
(a) Remove the screw and rear combination light bracket. |
|
5. REMOVE REAR COMBINATION LIGHT LENS AND BODY (for Bulb Type Turn Signal Light)
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sliding Roof System: Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be dis ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Immobiliser System: Engine Immobiliser System Incorrect Assembly (B279C95)
DESCRIPTION If an ECM that is incompatible with the immobiliser system is installed, the ECM will store this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area Note B279C95 Engine Immobiliser System Incorrect Assembly An ECM that is incompatible with the immobiliser ...