REMOVAL
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG
Click here
2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)
Click here
3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)
Click here
4. REMOVE DOOR ARMREST COVER
Click here
5. REMOVE COURTESY LIGHT ASSEMBLY
Click here
6. REMOVE FRONT DOOR NO. 1 STIFFENER CUSHION
Click here
7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
Click here
8. REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY
| (a) Disconnect the 2 connectors. |
|
(b) Remove the 2 screws and outer mirror control ECU assembly.
(c) Remove the 2 grommets.
NOTICE:
Be sure to replace the grommets with new ones.
Components
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Camshaft Position Sensor: Installation
INSTALLATION PROCEDURE 1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2) (a) Apply a light coat of engine oil to the O-ring of the VVT sensor. NOTICE: If reusing the VVT sensor, be sure to inspect the O-ring. (b) Apply adhesive to 2 or 3 threads at the end of the bolt. Adhesive: Toyota Genuine ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Navigation System: GVIF Disconnected (from Park Assist/Monitoring ECU to EMV/MM Integrated Device) (B1574)
DESCRIPTION The multi-display assembly and parking assist ECU are connected via video signal (digital) lines. This DTC is stored when a video signal (digital) line is disconnected. DTC No. Detection Item DTC Detection Condition Trouble Area B1574 GVIF Disconnected (from Park Assist/Mo ...