Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Entry Interior Alarm does not Sound

NOTICE:

• The smart access system with push-button start (for Entry Function) uses the LIN communication system and CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the smart access system with push-button start (for Entry Function) after confirming that the communication systems are functioning properly.

  Click here

• When using the Techstream with the engine switch off, connect the Techstream to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and the vehicle begins. Then select the vehicle type under manual mode and enter the following menus: Body Electrical / Smart Access. While using the Techstream, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the Techstream and the vehicle.

  Click here

• After repair, confirm that no DTCs are output.

Driver Side Door Entry Lock and Unlock Functions do not Operate

DESCRIPTION If the entry lock and unlock functions do not operate for the driver door only, the request code may not be being transmitted from the driver door or the front door outside handle assembly ...

Back Door Entry Unlock Function does not Operate

DESCRIPTION If the entry unlock function does not operate for the back door only, but the entry lock function operates, the request code is being transmitted properly from the back door. In this case, ...

Other materials:

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: Parts Location
PARTS LOCATION ILLUSTRATION *A w/ Rear No. 2 Seat *B w/o Rear No. 2 Seat *1 FUEL PUMP (for Low Pressure Side) *2 SEMICONDUCTOR PWR INTEGRATION ECU *3 MASS AIR FLOW METER SUB-ASSEMBLY *4 PARK/NEUTRAL POSITION SWITCH ASSEMBLY *5 NO. 2 VACUUM SWITCHING VALVE ASSEMBLY ...

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Washer Nozzle(for Front Side): On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT WASHER NOZZLE SUB-ASSEMBLY (a) Operate the washer nozzle sub-assemblies and check the position that the washer fluid contacts the windshield. Standard: Center of washer fluid contacts the windshield in the areas shown in the illustration. *a Upper Li ...