PARTS LOCATION
ILLUSTRATION
| *1 | FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (for LH) | *2 | FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (for RH) |
| *3 | SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) | *4 | ROOF SUNSHADE ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) |
| *5 | COMBINATION METER ASSEMBLY | *6 | MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
| *7 | INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY - ECU-IG1 NO. 4 FUSE - S/ROOF FUSE | *8 | DLC3 |
| *9 | SLIDING ROOF SWITCH | *10 | ROOF SUNSHADE SWITCH |
| *11 | TILT SWITCH | *12 | NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY - S/ROOF NO. 2 FUSE |
| *13 | MAP LIGHT ASSEMBLY | - | - |
Precaution
System DiagramLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Airbag System: Short in D Squib (Dual Stage - 2nd Step) Circuit (B1810-B1813)
DESCRIPTION The driver squib 2nd step circuit consists of the airbag sensor assembly, spiral cable sub-assembly and horn button assembly. The airbag sensor assembly uses this circuit to deploy the airbag when deployment conditions are met. These DTCs are stored when a malfunction is detected in the ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Brake Hold Operated Indicator Light Circuit
DESCRIPTION The brake hold operated indicator light illuminates when the brake hold system is operating (vehicle stopped due to brake fluid pressure hold) and turns off when the brake hold system operation is finished (brake fluid pressure decreases). The brake hold system may not operate depending ...