PROBLEM SYMPTOMS TABLE
HINT:
| Symptom | Suspected Area | Link |
|---|---|---|
| Battery symbol is displayed on multi-information display | Battery | |
| Generator assembly (for 150 A Type) | | |
| Generator assembly (for 180 A Type) | | |
| Charging system | | |
| Charging failure | Generator pulley with clutch | |
| Generator assembly | ||
| Noise occurs from V-ribbed belt or generator assembly | V-ribbed belt | |
| Generator pulley with clutch | ||
| Generator assembly |
| Symptom | Suspected Area | Link |
|---|---|---|
| Charge warning light comes on | Battery | |
| Generator assembly (for 150 A Type) | | |
| Generator assembly (for 180 A Type) | | |
| Charging system | | |
| Charging failure | Generator pulley with clutch | |
| Generator assembly | ||
| Noise occurs from V-ribbed belt or generator assembly | V-ribbed belt | |
| Generator pulley with clutch | ||
| Generator assembly |
How To Proceed With Troubleshooting
Terminals Of EcmLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Back Door Lock: Inspection
INSPECTION PROCEDURE 1. INSPECT BACK DOOR LOCK ASSEMBLY *a Clockwise *b Counterclockwise *c Over-latch *d Full-latch *e Half-latch *f Open-latch *g Component without harness connected (Back Door Lock Assembly) (a) Apply battery voltage to the door lock mo ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Shift Lever: Inspection
INSPECTION PROCEDURE 1. INSPECT SHIFT LOCK CONTROL ECU HINT: If the results of the following inspections are as specified but a malfunction has occurred, replace the transmission floor shift assembly. (a) Inspect wire harness: (1) Disconnect the shift lock control ECU connector. (2 ...