CAUTION / NOTICE / HINT
HINT:
*: Use the Techstream.
PROCEDURE
| 1. | VEHICLE BROUGHT TO WORKSHOP |
|
| 2. | CUSTOMER PROBLEM ANALYSIS |
HINT:
| What | Vehicle model, system name |
| When | Date, time, occurrence frequency |
| Where | Road conditions |
| Under what conditions? | Running conditions, driving conditions, weather conditions |
| How did it happen? | Problem symptoms |
|
| 3. | INSPECT BATTERY VOLTAGE |
(a) Measure the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
|
| 4. | INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
(a) Check if CAN communication DTCs are output.
Click here
| Result | Proceed to |
|---|---|
| CAN communication DTCs are not output. | A |
| CAN communication DTCs are output. | B |
| B | | GO TO CAN COMMUNICATION SYSTEM |
|
| 5. | CHECK FOR DTC* |
HINT:
Refer to DTC Check / Clear.
Click here
| Result | Proceed to |
|---|---|
| DTCs are not output. | A |
| DTCs are output. | B |
| B | | GO TO DTC CHART |
|
| 6. | REFER TO PROBLEM SYMPTOMS TABLE |
HINT:
Refer to Problem Symptoms Table.
Click here
| Result | Proceed to |
|---|---|
| Malfunctioning parts are not confirmed. | A |
| Malfunctioning parts are confirmed. | B |
| B | | GO TO STEP 12 |
|
| 7. | OVERALL ANALYSIS AND TROUBLESHOOTING* |
HINT:
Refer to Data List / Active Test.
Click here
| Result | Proceed to |
|---|---|
| Malfunctioning parts are not confirmed. | A |
| Malfunctioning parts are confirmed. | B |
| B | | GO TO STEP 12 |
|
| 8. | CHECK ECM CIRCUIT |
HINT:
Refer to Terminals of ECM.
Click here
| NG | | GO TO STEP 12 |
|
| 9. | CHECK FOR INTERMITTENT PROBLEMS |
HINT:
Refer to Symptom Simulation.
Click here
|
| 10. | CONDUCT PARTS INSPECTION |
|
| 11. | IDENTIFY PROBLEM |
|
| 12. | ADJUST AND/OR REPAIR |
|
| 13. | CONDUCT CONFIRMATION TEST |
| NEXT | | END |
System Diagram
Problem Symptoms TableLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Meter / Gauge System: Meter Illumination is Always Dark
DESCRIPTION The combination meter assembly receives signals from this circuit to adjust the illumination of the combination meter assembly. The combination meter assembly sets the illumination level based on the user operation of the light control rheostat switch. WIRING DIAGRAM CAUTION / NOTICE / ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > How To Troubleshoot Ecu Controlled Systems: General Information
GENERAL INFORMATION
A large number of ECU controlled systems are used in this vehicle. In general, ECU controlled systems are considered to be very intricate, requiring a high level of technical knowledge to troubleshoot. However, most problem checking procedures only involve inspecting the ECU c ...