Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual: Front Wiper Rubber

Components

COMPONENTS

ILLUSTRATION

*1

FRONT WIPER BLADE

*2

FRONT WIPER BLADE RUBBER

Replacement

REPLACEMENT

CAUTION / NOTICE / HINT

NOTICE:

Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade.

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE FRONT WIPER BLADE

(a) Turn the engine switch on (IG).

(b) Turn the engine switch off and operate and hold the windshield wiper switch assembly in the MIST position for 2 seconds or more.

HINT:

If the front wiper blade does not move to the service position, turn the engine switch on (IG) and then perform this procedure again.

(c) Push the lock button of the front wiper blade to release the lock.

*a

Lock Button

Push

Remove in this Direction

(d) Remove the front wiper blade from the front wiper arm as shown in the illustration.

NOTICE:

Place a piece of cloth between the front wiper arm and windshield glass to avoid damaging the windshield glass.

2. REMOVE FRONT WIPER BLADE RUBBER

(a) Disengage the claw and remove the front wiper blade rubber from the front wiper blade as shown in the illustration.

Remove in this Direction

3. INSTALL FRONT WIPER BLADE RUBBER

(a) Insert the front wiper blade rubber into the front wiper blade.

(b) Engage the claw to install the front wiper blade rubber as shown in the illustration.

Install in this Direction

NOTICE:

Make sure the claw is securely engaged or the front wiper blade rubber may come out of the front wiper blade while driving or using the windshield wipers.

4. INSTALL FRONT WIPER BLADE

(a) Slide the front wiper blade until the lock button locks to install the front wiper blade.

*a

Lock Button

Install in this Direction

NOTICE:

Make sure that the lock button locks so that it is installed securely.

(b) Turn the engine switch on (IG).

(c) Operate the windshield wiper switch assembly to return the front wiper arm and blade assemblies to their original position.

(d) Turn the engine switch off.

    Installation
    INSTALLATION CAUTION / NOTICE / HINT NOTICE: Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade. ...

    Headlight Cleaner Actuator
    ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Headup Display System: Diagnostic Trouble Code Chart
    DIAGNOSTIC TROUBLE CODE CHART Headup Display System DTC No. Detection Item Memory Note Link B1321 Lost Communication with EMV DTC stored - U0100 Lost Communication with ECM / PCM "A" DTC stored - U0142 Lost Communication with Body Control Module "B" D ...

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Knock Sensor: Installation
    INSTALLATION PROCEDURE 1. INSTALL KNOCK CONTROL SENSOR HINT: Perform "Inspection After Repair" after replacing a knock control sensor. Click here (a) Temporarily install the 2 knock control sensors to the cylinder block sub-assembly with the 2 bolts so that the knock control sensor installation p ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2024 Copyright www.lexusrx.net
    0.0163