DTC CHECK / CLEAR
CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Body Electrical > Main Body > Trouble Codes(e) Check for DTCs.
Click here
CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Body Electrical > Main Body > Clear DTCs(e) Clear the DTCs.
Data List / Active Test
Diagnostic Trouble Code ChartLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Back Door System (w/ Outside Door Control Switch): Power Back Door cannot be Operated Using Kick Sensor
DESCRIPTION The kick door control sensor turns the sensing circuit on or off based on the vehicle speed and IG and ACC signals sent from the main body ECU (multiplex network body ECU) via LIN communication. When the kick door control sensor detects a kick operation, it sends an operation signal to t ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Yaw Rate Sensor Signal Compare Failure (C124F62)
DESCRIPTION for Optitron Meter Type:
This DTC is stored when the skid control ECU (brake actuator assembly) detects improper installation of the yaw rate sensor (airbag sensor assembly) or an abnormality in the difference between the yaw rate sensor value and the control value estimated based on ...