CHECK MODE PROCEDURE
REFRIGERANT SHORTAGE CHECK IN NORMAL OPERATION (CHECK A/C SWITCH INDICATOR AND DTC)
(a) Start the engine.
(b) Check that the A/C switch indicator remains on when the following conditions are met.
| *a | A/C Switch (Multi-display) |
| Item | Condition |
|---|---|
| A/C switch | On |
| A/C operation time | 15 minutes or more |
| Ambient temperature* | 0 to 49°C (32 to 120°F) |
| Engine coolant temperature | 45°C (113°F) or more |
*: If the ambient temperature is not within the range shown, do not perform this check.
HINT:
The A/C switch indicator and air conditioning system turn off if the amount of refrigerant in the system is insufficient.
(c) Connect the Techstream to the DLC3.
(d) Check for DTC B14B8.
Click here
| Result | Amount of Refrigerant | Corrective Action |
|---|---|---|
| DTC B14B8 is output | Empty or nearly empty | Check for refrigerant leaks using a halogen leak detector, and repair if necessary. Click here |
| DTC B14B8 is not output | Correct or insufficient | Perform a refrigerant shortage check using the Techstream. |
REFRIGERANT SHORTAGE CHECK USING TECHSTREAM
(a) Connect the Techstream to the DLC3.
(b) Start the engine.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Air Conditioner / Utility / Refrigerant Gas Volume Check.
Body Electrical > Air Conditioner > Utility| Tester Display |
|---|
| Refrigerant Gas Volume Check |
(e) According to the display on the Techstream, perform the refrigerant shortage check when the following conditions are met.
Measurement Condition:| Item | Condition |
|---|---|
| A/C switch | On |
| Ambient temperature* | 0 to 49°C (32 to 120°F) |
| Blower speed | HI |
*: If the ambient temperature is not within the range shown, do not perform this check.
HINT:
| Result | Amount of Refrigerant | Corrective Action |
|---|---|---|
| Refrigerant shortage | Insufficient or leakage |
|
| Refrigerant correct | Correct | - |
Terminals Of Ecu
Dtc Check / ClearLexus RX (RX 350L, RX450h) 2016-2025 Owners Manual > Operating the lights and
wipers: Windshield wipers and
washer
Operating the wiper lever
Operating the lever operates the
wipers or washer as follows.
When "AUTO" is selected, the wipers will operate automatically when the sensor
detects falling rain. The system automatically adjusts wiper timing in
accordance
with rain volume and vehicle speed.
Th ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Automatic Transaxle System: Brake Switch "B" Circuit Short to Battery (P070312)
DESCRIPTION The purpose of the stop light switch signal circuit is to prevent the engine from stalling when the brakes are suddenly applied while driving in the lock-up condition. When the brake pedal is depressed, the stop light switch assembly sends a signal to the ECM. The ECM then cancels the op ...