INSPECTION
PROCEDURE
1. INSPECT INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY (INSTRUMENT PANEL AMBIENT ILLUMINATION LIGHT)
| (a) Apply battery voltage to the connector and check that the instrument panel ambient illumination light comes on. OK:
If the result is not as specified, replace the interior illumination light sub-assembly. |
|
Removal
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Meter / Gauge System: Open in Turn Signal Circuit (B1507)
DESCRIPTION These DTCs are stored when the combination meter assembly detects an open in a turn signal light circuit, or a short in a turn signal light circuit or the hazard warning light circuit. HINT:
If there is an open in a front turn signal light circuit or rear turn signal light circuit, th ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Seat Switch (for Rear No. 2 Seat): Inspection
INSPECTION PROCEDURE 1. INSPECT FOLD SEAT SWITCH ASSEMBLY (a) Inspect fold seat switch assembly (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Ground Tester Connection Condition Specified Condition 8 - 7 Fold switch (RH) pushed Below ...