REMOVAL
PROCEDURE
1. REMOVE INSTRUMENT PANEL GARNISH RH
Click here
2. REMOVE NO. 2 INSTRUMENT CLUSTER MOULDING
Click here
3. REMOVE INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Disengage the 3 claws to remove the interior illumination light sub-assembly as shown in the illustration.
| Remove in this Direction |
Components
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sfi System: VC Output Circuit
DESCRIPTION The ECM constantly generates a 5 V power source voltage from the battery voltage supplied to the +B, +B2 (BATT) terminals to operate the microprocessor. The ECM also provides this power to the sensors through the VC output circuit. When the VC circuit has a short circuit, the microproce ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Knock Sensor: Installation
INSTALLATION PROCEDURE 1. INSTALL KNOCK CONTROL SENSOR HINT: Perform "Inspection After Repair" after replacing a knock control sensor. Click here (a) Temporarily install the 2 knock control sensors to the cylinder block sub-assembly with the 2 bolts so that the knock control sensor installation p ...