INSPECTION
PROCEDURE
1. INSPECT REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (REAR DOOR AMBIENT ILLUMINATION LIGHT LH)
| (a) Apply battery voltage to the connector and check that the rear door ambient illumination light LH comes on. OK:
If the result is not as specified, replace the rear door trim board sub-assembly LH. |
|
2. INSPECT REAR DOOR TRIM BOARD SUB-ASSEMBLY RH (REAR DOOR AMBIENT ILLUMINATION LIGHT RH)
| (a) Apply battery voltage to the connector and check that the rear door ambient illumination light RH comes on. OK:
If the result is not as specified, replace the rear door trim board sub-assembly RH. |
|
Removal
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Air Conditioning Pressure Sensor: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT AIR CONDITIONER PRESSURE SENSOR (a) Check the wire harness. (1) Disconnect the A9 air conditioner pressure sensor connector. (2) Disconnect the J42 air conditioning amplifier assembly connector. (3) Measure the resistance according to the value(s) in the ta ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Yaw Rate Sensor / Multi-axis Acceleration Sensor Module "A" (C124000)
DESCRIPTION If the identification ID of the yaw rate and acceleration sensor is different to that stored in the skid control ECU (brake actuator assembly), this DTC is stored. DTC No. Detection Item DTC Detection Condition Trouble Area C124000 Yaw Rate Sensor / Multi-axis Acceleration ...