INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
Click here
2. INSTALL COURTESY LIGHT ASSEMBLY
Click here
3. INSTALL REAR DOOR ARMREST COVER
Click here
4. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR UPPER ARMREST BASE PANEL
Click here
5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG
Click here
6. INITIALIZE POWER WINDOW CONTROL SYSTEM
Click here
7. INSPECT POWER WINDOW OPERATION
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Axle Carrier (for Awd): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear axle carrier sub-assembly removal/installation are shown below. Necessary Procedures After Parts R ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sliding Roof Housing (for Slidng Roof): Installation
INSTALLATION PROCEDURE 1. INSTALL SLIDING ROOF HOUSING ASSEMBLY (a) Loosen the 10 bolts of the brackets of the sliding roof housing assembly. (b) Temporarily install the sliding roof housing assembly with the 6 nuts and 8 bolts. (c) Tighten the 2 nuts. HINT: Tighten the 2 nuts in the order shown in ...