CUSTOMIZE PARAMETERS
PROCEDURE
1. CUSTOMIZE LIGHTING SYSTEM (INT)
(a) Customizing using the Techstream
HINT:
The following items can be customized.
NOTICE:
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Main Body / Utility / Customize / Illuminated Entry.
(5) Select the setting by referring to the table below.
Illuminated Entry Tester Display | Description | Default | Setting | ECU |
---|---|---|---|---|
Lighting Time | Changes the lighting time of the following lights that are operated by the timer function when the door switch of the map light assembly is on:
| 15 s | 10:30 s,00:15 s,01:7.5 s | Main body ECU (Multiplex network body ECU) |
I/L when ACC OFF | Turns off the following lights automatically when the door switch of the map light assembly is on and the engine switch is turned from on (IG) or on (ACC) to off:
| ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
I/L ON W/Door Key Unlock | Turns on the following lights automatically when the door switch of the map light assembly is on and the doors are unlocked by an unlock operation (key-linked, wireless or entry unlock function):
| ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
Room Light when Aprchd | Turns on the following lights when the door switch of the map light assembly is on and the electrical key transmitter sub-assembly is brought near the vehicle:
| ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
Inside Foot Light | Turns on the following lights:
| ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
Light Control | Dims the following lights when the engine switch is on (IG) and the shift lever is moved to any position other than P:
| ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
Interior Light Control | Turns on the following lights:
| ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
Interior Illumination Light | Turns on the following lights:
| ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
(b) Customizing using the multi-display
(1) Turn the engine switch on (IG).
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.
(3) Select the setting by referring to the table below:
Light Settings Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Interior Light Off Timer | 15 sec. | Changes the lighting time of the following lights that are operated by the timer function when the door switch of the map light assembly is on:
| Off, 15 sec., 7.5 sec. or 30 sec. | Main body ECU (Multiplex network body ECU) |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Power Outlets (int): Center Power Outlet Socket (for Console Box Rear Side)
ComponentsCOMPONENTS ILLUSTRATION *1 CONSOLE REAR END PANEL SUB-ASSEMBLY *2 NO. 3 USB CHARGER SOCKET RemovalREMOVAL PROCEDURE 1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Click here 2. REMOVE NO. 3 USB CHARGER SOCKET (a) Disengage the 4 claws and remove the No. 3 USB charger socket a ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Occupant Classification Ecu: Installation
INSTALLATION PROCEDURE 1. INSTALL OCCUPANT DETECTION ECU (a) Engage the claw to install the occupant detection ECU. NOTICE: If the occupant detection ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the occupant detection ECU with a new one. ...